Products
-
- High Percision Test Cable
- Low Loss Stable Amplitude Flexible Coaxial Cable
- Ultra-low Loss Amplitude and Phase Stable Flexible Coaxial Cable
- Low Loss Ultra-Flexible Amplitude And Phase Stable Coaxial Cable
- Economical Internal Interconnection Cable
- Foam Polyethylene Insulated Coaxial Cable
- Semi-Rigid Coaxial Cable
- Manual Formable&Semi Flexible Coaxial Cable
-
- Low loss ultra-flexible amplitude and phase stable cable assembly
- Cable assembly for testing purposes
- Economical & ultra-low loss semi-rigid cable assembly
- Low-loss amplitude and phase stable cable assembly
- High-precision tensile and torsion-resistant armored cable assembly
- Economical flexible cable assembly
- Low-frequency regular cable assembly
-
-
- 1.0mm Series
- 1.85mm Series
- 1.85mm/1.0mm Series
- 1.85mm/SSMA Series
- 2.4mm Series
- 2.4mm/SMP Series
- 2.4mm/1.85mm Series
- 2.4mm/SSMA Series
- 2.4mm/SSMP Series
- 2.92mm Series
- 2.92mm/1.85mm Series
- 2.92mm/2.4mm Series
- 2.92mm/SMP Series
- 2.92mm/SSMA Series
- 2.92mm/SSMP Series
- 3.5mm Series
- 3.5mm/2.4mm Series
- 3.5mm/2.92mm Series
- 3.5mm/BMA Series
- 3.5mm/SMP Series
- N Series
- N/2.92mm Series
- N/3.5mm Series
- N/SMA Series
- SMA Series
- SMA/SMP Series
- SMA/SSMA Series
-
-
Load+
-
Cable
- High Percision Test Cable
- Low Loss Stable Amplitude Flexible Coaxial Cable
- Ultra-low Loss Amplitude and Phase Stable Flexible Coaxial Cable
- Low Loss Ultra-Flexible Amplitude And Phase Stable Coaxial Cable
- Economical Internal Interconnection Cable
- Foam Polyethylene Insulated Coaxial Cable
- Semi-Rigid Coaxial Cable
- Manual Formable&Semi Flexible Coaxial Cable
- Cable Connector
-
Cable Assemblies
- Low loss ultra-flexible amplitude and phase stable cable assembly
- Cable assembly for testing purposes
- Economical & ultra-low loss semi-rigid cable assembly
- Low-loss amplitude and phase stable cable assembly
- High-precision tensile and torsion-resistant armored cable assembly
- Economical flexible cable assembly
- Low-frequency regular cable assembly
-
Antenna
- Horn Antenna
- Standard Gain Horn Antenna
- Wide-band Double Ridge Horn Antenna
- Conical Horn Antenna
- Corrugated Horn Antenna
- Dual-Polarized Horn Antenna
- Waveguie Probe
- Waveguide Probe With Coaxial Connector
- Waveguide Probe With Waveguide Port
- Cassegrain Antenna
- Log-periodic Antenna
- Parabolic Antenna
- Microstrip Array Antenna
-
Adapters & Transitions
- Coaxial Adapter
- 1.0mm Series
- 1.85mm Series
- 1.85mm/1.0mm Series
- 1.85mm/SSMA Series
- 2.4mm Series
- 2.4mm/SMP Series
- 2.4mm/1.85mm Series
- 2.4mm/SSMA Series
- 2.4mm/SSMP Series
- 2.92mm Series
- 2.92mm/1.85mm Series
- 2.92mm/2.4mm Series
- 2.92mm/SMP Series
- 2.92mm/SSMA Series
- 2.92mm/SSMP Series
- 3.5mm Series
- 3.5mm/2.4mm Series
- 3.5mm/2.92mm Series
- 3.5mm/BMA Series
- 3.5mm/SMP Series
- N Series
- N/2.92mm Series
- N/3.5mm Series
- N/SMA Series
- SMA Series
- SMA/SMP Series
- SMA/SSMA Series
- Waveguide Coaxial Adapter
- Waveguide Coaxial Adapter-End Launching
- Waveguide Coaxial Adapter-Right Angle
- Double Ridge Waveguide Coaxial Adapter
- Double Ridge Waveguide Coaxial Adapter-Right Angle
- Double Ridge Waveguide Coaxial Adapter-End Launching
- Switch
- Attenuator
- Power Divider
- Amplifier
- Coupler
- Frequency Synthesizer
- PCB Microstrip Connector
- Isolator
- Filter
- Matrix
- Circulator
- Connecting Waveguide
- Bias Tee
- DC-block
- Detector
- Lifting Table
- Load
- Calibration Kit
- Magic-Tee
- Phase Shifter
- Product
- Rotary Joint
- Signal Acquisition
- Signal Generator
- Torque Wrench
- TX/RX Module
- Vector Network Analyzer
- VFD
- Waveguide Gasket
- Waveguide screw
- Waveguide short-circuiter
Home / Products / Matrix / Switch Matrix / Switch Matrix
Switch Matrix
Customize switch matrices such as 6 * 6 and 8 * 8
- Switch Matrix
- In stock
Please contact us if you need more units than what is available online.
BULK PRICING
| TECHNICAL DETAILS | |
|---|---|
| customized product | switch matrix |
| Indicator requirements | On-demand customization |
RELATED PRODUCTS
-
-
Filter matrix
-
Switch Matrix
Requirements for customized switch matrix indicators 1、 Equipment type: 6 * 6, 8 * 8 and other switch matrices 2、 Performance parameters of switch matrix: 1. Supporting frequency bands 2. Insertion loss 3. Port standing wave 4. Isolation degree 5. Switching time 3、 Equipment interface type 4、 Control method 5、 Working power supply mode 6、 The purpose of the switch matrix is to control the opening and closing of the circuit. The signal switch system in automatic testing equipment usually consists of two or more switch matrices, which are connected to each other according to various interface standards to form flexible switching from testing resources to UUT. Yuexiang Technology is committed to the research and development of high-efficiency and high-performance switch matrix testing system equipment, providing a complete set of testing solutions. The products cover a frequency of up to 67GHz and are skilled in high difficulty, high precision, high consistency, and stability testing requirements. They are proficient in software algorithms and have comprehensive development capabilities for high-frequency automatic testing.
