YS9010 EMI test receiver
EMI test receiver is an automatic radio disturbance test receiver, which is the main tool for conducting EMI tests.
Products
-
- Low loss ultra-flexible amplitude and phase stable cable assembly
- Cable assembly for testing purposes
- Economical & ultra-low loss semi-rigid cable assembly
- Low-loss amplitude and phase stable cable assembly
- High-precision tensile and torsion-resistant armored cable assembly
- Economical flexible cable assembly
- Low-frequency regular cable assembly
-
- High Percision Test Cable
- Low Loss Stable Amplitude Flexible Coaxial Cable
- Ultra-low Loss Amplitude and Phase Stable Flexible Coaxial Cable
- Low Loss Ultra-Flexible Amplitude And Phase Stable Coaxial Cable
- Economical Internal Interconnection Cable
- Foam Polyethylene Insulated Coaxial Cable
- Semi-Rigid Coaxial Cable
- Manual Formable&Semi Flexible Coaxial Cable
-
Load+
- Matrix
- Switch
- Cable Connector
- Coupler
- Circulator
-
Cable Assemblies
- Low loss ultra-flexible amplitude and phase stable cable assembly
- Cable assembly for testing purposes
- Economical & ultra-low loss semi-rigid cable assembly
- Low-loss amplitude and phase stable cable assembly
- High-precision tensile and torsion-resistant armored cable assembly
- Economical flexible cable assembly
- Low-frequency regular cable assembly
- Frequency Synthesizer
-
Adapters & Transitions
- Coaxial Adapter
- 1.0mm Series
- 1.85mm Series
- 2.4mm Series
- 2.92mm Series
- 3.5mm Series
- N Series
- SMA Series
- SSMA Series
- Waveguide Coaxial Adapter
- Waveguide Coaxial Adapter-End Launching
- Waveguide Coaxial Adapter-Right Angle
- Double Ridge Waveguide Coaxial Adapter
- Double Ridge Waveguide Coaxial Adapter-Right Angle
- Double Ridge Waveguide Coaxial Adapter-End Launching
-
Antenna
- Horn Antenna
- Standard Gain Horn Antenna
- Wide-band Double Ridge Horn Antenna
- Conical Horn Antenna
- Corrugated Horn Antenna
- Dual-Polarized Horn Antenna
- Waveguie Probe
- Waveguide Probe With Coaxial Connector
- Waveguide Probe With Waveguide Port
- Cassegrain Antenna
- Log-periodic Antenna
- Parabolic Antenna
- Microstrip Array Antenna
- Spectrum Analyzer
- Power Divider
- Amplifier
- PCB Microstrip Connector
- Attenuator
- Connecting Waveguide
- Bias Tee
-
Cable
- High Percision Test Cable
- Low Loss Stable Amplitude Flexible Coaxial Cable
- Ultra-low Loss Amplitude and Phase Stable Flexible Coaxial Cable
- Low Loss Ultra-Flexible Amplitude And Phase Stable Coaxial Cable
- Economical Internal Interconnection Cable
- Foam Polyethylene Insulated Coaxial Cable
- Semi-Rigid Coaxial Cable
- Manual Formable&Semi Flexible Coaxial Cable
- DC-block
- Detector
- EMI Test Receiver
- Filter
- Isolator
- Lifting Table
- Load
- Calibration Kit
- Magic-Tee
- Phase Shifter
- Product
- Rotary Joint
- Signal Acquisition
- Signal Generator
- Torque Wrench
- TX/RX Module
- Vector Network Analyzer
- VFD
- Waveguide Gasket
- Waveguide screw
- Waveguide short-circuiter
inventory:999
YS9010 EMI test receiver
Frequency range: 9kHz-1GHz, automatic generation of test reports
- SAM-6837030395-15-L1-4W
- In stock
Please contact us if you need more units than what is available online.
The EMI test receiver is a fully automatic radio disturbance test receiver that is the primary tool for conducting EMI testing. The frequency range is 9kHz-1GHz, and it is developed and designed in accordance with standards such as: 2010 and GB/T6113.101-2016, to meet the requirements of compatible standards.
BULK PRICING
| TECHNICAL DETAILS | |
|---|---|
| Measurement Frequency Range | 9kHz-1GHz |
| Standing Wave Ratio | 1.2(RFATT>10dB);2.0(RFATT=0dB) |
| Detection Method | Mean Value、Quasi-peak Value、Peak Value |
| Level Measurement Range | From (noise level + 6dBμV) to 120dBμV |
| Shielding Effectiveness | Within the frequency range of 9kHz to 1000MHz, under a field strength of 3V/m, the error is less than 1dB. |
| Spurious Signal | No more than 3 points, with a level less than 30dBuV |